2001 3" Body Lift Install
2001 Bumper
| | | | |
|
| | 2001 3" Body Lift Install
2001 Bumper
| |
||
| | | |
||
| | | | | |
|
|||||
| |
||||
|
|||||
|
||||
| | Remove the 6 bolts on the top shield and remove it. Remove the headlights and signals.  | | |
|
||||
| | | | |
| | | | |
| | Remove this screw on both sides. It holds the corner of the bumper to the quarter panel.  | | |
| | | | |
| | | | |
|
||||
| | Remove the splash guards that cover the fog lamps. Disconnect the fog lamps. Remove the 4 screws on the bottom of the bumper. Pull the facia away from the front end by popping each corner out where it meets the front quarter panel. There is a series of hook latches. Two are where the head lights use to be and three are on top above the oval on top of the grill. Pull the whole thing off to reveal the skeleton.  This is the front bumper. I didn't even try to reinstall it. The facia reinstalls easily and through the lower slot reveals the bumper mount. I will install some sort of pre-runner bumper later. My next project will be to remount the fog lamps with out the bumper. 
| | |
|
||||
|
||||
|
||||